Din Rail solution for Category Jacks!

Signamax Keystone Industrial DIN Rail Mounting Modules afford an opportunity to combine advantages of regular keystone jack design and transmission performance with simplicity and usability of industrial DIN-rail mounting systems.

Din Rail for Jack
State-of-the-art module’s design provides all kinds of features usually found in office work area solutions, – universal labeling, protection covers, “front access,” “gravity compensation” for patch cords along with such important for the industrial applications aspects as tool-less mounting and replacement of connector modules, quick access to any part of the assembly. Additionally, modules allow installing screened jacks without any extra efforts, parts, and tools.

Let’s get a good look at it from our YouTube channel.

There it is, the easiest and best way to get category jacks mounted on that Din Rail. To order the Signamax KI-DIN-RMM-SL visit Discount-Low-Voltage.com

Facial Recognition used for Access Control

Identify or verify users by their face, fingerprint, proximity card or PIN/Password…. or any combination, all conveniently from a single device. Built-in Infrared light source enables operation in dimly lit rooms.The Multibio 700 works without a computer. Complete setup and programming can be done via keypads and embedded firmware.

Stunning 3in color TFT touch screen provides ease of use and rich user experience with intuitive and user friendly GUI. Includes both voice and visual prompts which indicate the acceptance or rejection of fingerprint,

Can store up to 1500 faces, 2000 fingerprints, 10000 card holders and 100,000 transactions. The data can be backed up to a USB flash drive and can also be transferred to another reader in the absence of computer connectivity. Relay Outputs for electric lock visitor bell and alarm. Inputs for door status sensor and exit switch.

Supports multiple timezones and personnel groups for programming valid entry zones. The Alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows triple factor authentication for access control.

Let’s get a good look at it from our YouTube channel.

Let’s double check the many features of the MultiBio700

  • Elegant ergonomic German-designed enclosure
  • 3” TFT color touch-screen display
  • Supports 50 time zones, 99 groups and 10 unlock combinations for access control
  • Contact relays for door locks, exit button, alarms, bell, etc
  • Stores 2000 fingerprints and 400 faces and matches with superior accuracy
  • Infrared light source enables face detection and matching in dimly lit environments
  • Contactless 1-second employee recognition
  • Built-in TCP/IP, Serial and USB interfaces
  • Operates stand-alone or can be interfaced with third party access control panel using Wiegand Interface
  • A voice & visual indication for acceptance & rejection of valid & invalid fingerprints/faces
  • Multi-language support
  • SDK available for OEM customers and software developers
  • Also available with HID or Mifare card modules

I know, it looks cool and all but is it a chore to install? Let’s check out a installation video from ZK Access.

As you can tell there is work involved but if your familiar with wiring you should be able to knock this out.

Now if you want to get more bang for your buck, ZK access has software that is loaded with features and the software is free! You want to download ZKAccess 3.5 Software for standalone reader controllers. You will need to install the software on a computer and network the reader to the software.

Here’s a quick look at the software and you can get more familiar with this software by taking a look at many of their other videos on their YouTube channel.

Now you don’t have to network the Multibio-700 to a computer and use the software in order for it to do it’s job. The 3.5 software is a great option in case you want to get more bang for your buck. To order this online visit Discount-Low-Voltage.com

 

Need Access Control for 1 Door?

InBio carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily.

Let’s get a look at it from our YouTube channel.

InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an on-board SD card. Data is preserved if power is lost. InBio continues to operate if network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.

InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary Input/Output Linkages are built into the InBio controller’s firmware.

There’s also a 2 and 4 door kit available. To order the InBio-160 visit Discount-Low-Voltage.com

Need to install a Biometric Fingerprint Door Lock?

ML10 biometric fingerprint door lock is a Smart lock with embedded fingerprint recognition technology is easy to program and install, as no wiring is required. It’s a plug ‘n play replacement to your old “lock & key” door knob. Registering users with their fingerprints is also quick and easy. Each ML10 door lock can store and recognize up to 40 users. The ML10-B operates the very same way as does our ML10 (fingerprint door lock). However, this ML10-B version is additionally equipped with built-in Bluetooth technology that allows for remote control capability.

ML10’s next generation fingerprint recognition technology means authorized users never have to worry about accidental lockout because ML10 requires no keys nor codes which can be forgotten or lost. Users simply touch the fingerprint sensor to open the door. It is extremely secure, as authorized users don’t share their key or code because their fingerprint becomes their key and code! ML10 users’ registration data remains safely stored in the device, even in the event of a total power outage, so there is never a need to re-enroll users. And, there’s no need to change the locks when a previously authorized user is no longer permitted door access.

Ideal for residential and small business applications, the ML10’s door handle, latch and strike are reversible for either left or right-handed preference. Its Do-it-Yourself design makes upgrading to ML10 swift and simple. Powered by four AA alkaline batteries, the ML10 signals an audible warning when it’s time to replace the batteries. And, in the unlikely event of a total power loss, ML10 can still be operated manually by a traditional metal key which ships along with the ML10 and instructional guide.

Let’s check out a product unboxing and installtion video from our YouTube channel.

Now that you know it’s super easy to install place your order online for the ML10 at Discount-Low-Voltage.com

Biometric Access Control and Time Attendance Reader

Identify or verify users by their face, fingerprint, proximity card or PIN/Password…. or any combination, all conveniently from a single device. Built-in Infrared light source enables operation in dimly lit rooms. The Multibio 700 works without a computer. Complete setup and programming can be done via keypads and embedded firmware. Stunning 3in color TFT touch screen provides ease of use and rich user experience with intuitive and user friendly GUI. Includes both voice and visual prompts which indicate the acceptance or rejection of fingerprint, Can store up to 400 faces, 5000 fingerprints, 20000 card holders and 100,000 transactions. The data can be backed up to a USB flash drive and can also be transferred to another reader in the absence of computer connectivity. Relay Outputs for electric lock visitor bell and alarm. Inputs for door status sensor and exit switch. Supports multiple timezones and personnel groups for programming valid entry zones. The Alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows triple factor authentication for access control.

Let’s check out an overview from our buddy Eli the computer guy.

This is a great unit for companies that want more security and piece of mind and it ain’t even that expensive! To order the Multibio 700 visit Discount-Low-Voltage.com

Easy, Simple, 4 Door Access Control Kit

So we’ve sold a few of these and so far the installation contractors have given me a big thumbs up on the ease of installation, quality of the product and the support that the manufacture has given them. Let’s check this kit out from out YouTube channel.

As you can tell, all the parts are simple and easy enough for the end-user to get familiar with so they know who came in and out and when, but you need to know this system in and out so let’s check out the parts that are involved with this system. Let’s start with going over the features of the Access Control Panel.

Features of the InBio-460 Access Control Panel

  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software
  • System management by browser from client PC’s. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

I know this panel has a a lot of features but the software was probably the most talked about feature, people loved the real-time door status.

zk fingerprint

Let’s check out another part of the system that people love, the finger print reader.

Features of the FR1200

  • FR1200 can transfer fingerprint template to inBIO controller or F8 series fingerprint access controller through RS485 communication, so the latter is much more stable and secure
  • FR1200 has passed IP65 certification, so it can be applied to outdoor working environment
  • FR1200 has standard 125Khz ID Card module
  • FR1200 is very easy to be installed due to small size and only needs the RS485 communication
  • After upgrading the firmware of standalone access controllers, the FR1200 can work with them, which have RS485 communication
  • FR1200 works with inBIO controller or F8 series fingerprint access controller
  • The fingerprint is verified by internal access controller or inBIO controller.
  • Even if FR1200 is destroyed,the relay is on master device, so it can not open door
  • FR1200 uses ZK infrared detection fingerprint sensor creatively, it could detect fake fingerprints
  • User could feel if their fingerprint is verified or not, which is user-friendly and improves the accuracy and safety of access control data greatly.
  • FR1200 works with inBIO biometric access controllers to provide “one-stop” access control solutions for small and medium-sized enterprises

The IP65 rating allows it to be weatherproof and the time that it takes to calculate a print to open a door is very timely, nothing more irritating than a reader that takes it time.

If you want more ZK Access, Eli the computer guy has a great introduction on ZK, check out his video.

I think you get the point that this kit is loaded with features and if you need more information on this ZK 4 door kit, visit Discount Low Voltage.com

Related Posts Plugin for WordPress, Blogger...