Facial Recognition used for Access Control

Identify or verify users by their face, fingerprint, proximity card or PIN/Password…. or any combination, all conveniently from a single device. Built-in Infrared light source enables operation in dimly lit rooms.The Multibio 700 works without a computer. Complete setup and programming can be done via keypads and embedded firmware.

Stunning 3in color TFT touch screen provides ease of use and rich user experience with intuitive and user friendly GUI. Includes both voice and visual prompts which indicate the acceptance or rejection of fingerprint,

Can store up to 1500 faces, 2000 fingerprints, 10000 card holders and 100,000 transactions. The data can be backed up to a USB flash drive and can also be transferred to another reader in the absence of computer connectivity. Relay Outputs for electric lock visitor bell and alarm. Inputs for door status sensor and exit switch.

Supports multiple timezones and personnel groups for programming valid entry zones. The Alarm will be triggered when the tamper switch is activated. Internal Proximity Card or Mifare Card reader allows triple factor authentication for access control.

Let’s get a good look at it from our YouTube channel.

Let’s double check the many features of the MultiBio700

  • Elegant ergonomic German-designed enclosure
  • 3” TFT color touch-screen display
  • Supports 50 time zones, 99 groups and 10 unlock combinations for access control
  • Contact relays for door locks, exit button, alarms, bell, etc
  • Stores 2000 fingerprints and 400 faces and matches with superior accuracy
  • Infrared light source enables face detection and matching in dimly lit environments
  • Contactless 1-second employee recognition
  • Built-in TCP/IP, Serial and USB interfaces
  • Operates stand-alone or can be interfaced with third party access control panel using Wiegand Interface
  • A voice & visual indication for acceptance & rejection of valid & invalid fingerprints/faces
  • Multi-language support
  • SDK available for OEM customers and software developers
  • Also available with HID or Mifare card modules

I know, it looks cool and all but is it a chore to install? Let’s check out a installation video from ZK Access.

As you can tell there is work involved but if your familiar with wiring you should be able to knock this out.

Now if you want to get more bang for your buck, ZK access has software that is loaded with features and the software is free! You want to download ZKAccess 3.5 Software for standalone reader controllers. You will need to install the software on a computer and network the reader to the software.

Here’s a quick look at the software and you can get more familiar with this software by taking a look at many of their other videos on their YouTube channel.

Now you don’t have to network the Multibio-700 to a computer and use the software in order for it to do it’s job. The 3.5 software is a great option in case you want to get more bang for your buck. To order this online visit Discount-Low-Voltage.com

 

Speak Your Mind

*