Need Fiber for Security Cameras?

Fiber Optic Media Converters like the Signamax 065-1196A series, are the economical bridge between a copper infrastructure and an optical fiber run.  Even in smaller security networks the obstacle to reach distances greater than 100 meters will require an extension over fiber.
Fiber Camera Layout
Imagine a property with a copper-based network that has decided to increase their security parameters by installing additional cameras.  The additional coverage could be around the parking lot, a multi-story building, or maybe the property has multiple structures that will require extended data transmissions.  Once the copper-base recommended distance is breached between the cameras and the network video recorder, the transmission will typically work intermittently or not at all. To ensure the investment meets its intentions a span of optical fiber with the existing copper-base will allow a more reliable transmission for the extended span by decreasing the electromagnetic interference between the cameras and the NVR.
For more information regarding the Media Converter, PoE Switch visit Discount-Low-Voltage.com

Signal and Power Over Coax? Yes!

Now you can get Ethernet Over Coax with Power easily by simply using the new Palun converter by Everfocus. This is a great choice for when you need an IP solution at a location where coax is already ran and don’t want to deal with the labor and Cat5e material cost of a new cable run. Simply attach the send module on one end and the receive module on the other. Let’s check out a demo video from our YouTube channel.

Let’s go over some of the features.

– Maximum connection distance of 1148ft

– Automatic 802.3 & PoE detection

– Automatic MDI/MDI-X detection

– Any PoE device / PoE IP camera

– Cost saving, no need for re-cabling, keep the Coax for network surveillance

– Easy Installation

– Slim & compact design

An easy way to overturn the time consuming installation process, especially where some cable runs were a nightmare to run due to their location.

Questions? Comment below, thanks!

Easy Plug and Play Network Video Recorder

If you’re worried about installing a Network Video Recorder because of work involved with setting up the IP camera to be properly networked to the NVR you won’t be with the Plug and Play Network Video Recorder by Everfocus.

This NVR eliminates the need for complicated network configuration and with the Power Over Ethernet switch also included you’ll eliminate the need for a master power supply and you’ll also simplify the cabling infrastructure by running one Cat5e cable for both the power and signal.

Full HD 1080P video output brings superior picture performance on a massive scale and with its H.264 compression it provides up to 1.5 times better compression ratio than MPEG-4 along with low bandwidth consumption.

Let’s get a better feel for it from our YouTube channel.

As you can tell this would be a great way to get your feet wet with IP cameras and a NVR. If you’re still on the fence but want 1080P quality you may want to consider the Everfocus line of HD cameras that use a traditional DVR.

Share and comment below.

Thanks!

 

1 port Gigabit Capable PoE/PoE+ Power Injector

Signamax Connectivity Systems 065-POEINJ-G 1-port Gigabit-capable PoE/PoE+ Power Injector is designed to be a compact and cost effective full compliant solution for Network Cameras, IP phones, Outdoor and Indoor Wireless Access Points, and other IP terminal installations. Unlike many competing products, the 065-POEINJ-G supports a 10/100/1000BaseT/TX RJ45 connection utilizing phantom power over RJ45 pins 4,5, 7, and 8, and supports either the 802.3 at (30 watt) and 802.3 at (15.4 watt) IEEE PoE and PoE+ standards in a compact package for wall or desktop mounting. The 065-POEINJ-G injector operates at temperatures ranging from 14° F to 104° F (-10° C to 40° C). This rugged, compact, and cost-effective PoE/PoE+ power injector is the easy answer for individual PoE or PoE+ deployments where PoE switches are not appropriate.

Key Features:

  • 10BaseT, 100BaseTX, and 1000BaseT support.
  • PoE (15.4 watts) and PoE+ (30 watts) supported.
  • Operating temperature range from 14° F to 104° F (-10° C to 40° C).
  • Rugged wall-mountable high-strength molded housing.

Another thing I like about this PoE injector is it’s 5 year warranty.